TPO Insulated Cable and Wire from Hitachi Cable
Hitachi Cable Manchester manufactures several types of TPO insulated
wire cables. This type of insulated wire cables are the best internal
cables available on the market. ThermoPlastic Olefin has both
dielectric and crosstalk properties that are superior to PVC.
.025" Stranded Dual Laminated TPO Micro Quick Twist Cable
The micro quick twist ribbon cable is a 30 Gauge (AWG) dual laminated
stranded tinned copper. The conductors are individually wrapped
with TPO (ThermoPlastic Olefin) insulation. The copper stranded
conductors are pulled into pairs then bonded into flat sections
for IDC termination points. This wire cable is designed for SCSI
Fast-XX, SPI-2, SPI-3 U160 and SPI-4 applications including internal
SCSI, servers and disk arrays.
.025" Stranded TPO Micro Quick Twist Cable
The .025" stranded micro quick twist cable is built with
30 Gauge (AWG) stranded tinned copper. The conductors are individually
wrapped with TPO (ThermoPlastic Olefin) insulation. The copper
stranded conductors are pulled into pairs then bonded into flat
non-laminated tape sections for IDC termination points. This wire
cable is designed for internal SCSI drives, SPI, SPI-2, SPI-3,
SPI-4 and U1, U2 servers.
SCSI
TPO Solid Dual-Laminated Micro Quick Twist Cable
The SCSI micro quick twist ribbon cable is built with 30 Gauge
(AWG) dual laminated solid tinned copper. The conductors are individually
extruded with TPO (ThermoPlastic Olefin) insulation. Conductors
are pulled into pairs then bonded into flat sections for IDC termination
points. A thin clear lamination tape is applied to both sides
to bond all pairs to prevent floating. This wire cable is designed
for SCSI Fast-XX, SPI-2, SPI-3 and SPI-4 U320 applications including
internal SCSI devices, 1U & 2U servers.
SCSI
TPO Stranded Dual-Laminated Micro Quick Twist Cable
The SCSI stranded micro quick twist ribbon cable is built with
30 Gauge (AWG) dual laminated tinned copper. The conductors are
extruded with TPO (ThermoPlastic Olefin) insulation and pulled
into pairs and bonded into flat sections for IDC termination points.
A thin clear lamination tape is applied to both sides to bond
all pairs to prevent floating. This wire cable is designed for
SCSI Fast-XX, SPI-2, SPI-3 and other SPI-4 U320 applications including
internal SCSI devices, 1U & 2U servers.
.025" TPO Flat Solid MicroZip Cable
The flat ribbon microzip cable is built in 30 or 32 Gauge (AWG)
solid silver-plated copper. The silver plated copper is fully
extruded with TPO (ThermoPlastic Olefin) insulation and a red
polarity stripe (provides no chipping or flaking) into position
number one for easy identification. This wire cable is designed
for SCSI Fast-XX, SPI-2 & SPI-3, Ultra ATA 33, 66, 100 and
133 compliant applications.
.050" TPO Stranded Flat Ribbon Cable
The flat ribbon cable is constructed with 28 Gauge (AWG) stranded
tinned copper and extruded with ThermoPlastic Olefin (TPO) insulation.
A red co-extruded stripe is applied in lier of ink to prevent
flaking. This wire cable is designed for higher controlled impedance
and low capcitance environments.
.025" TPO Flat MicroZip Stranded Cable
The flat microzip wire cable consists of 30 Gauge (AWG) stranded
tinned copper and extruded with TPO (ThermoPlastic Olefin) insulation.
A polarity stripe is co-extruded into position number one for
easy identification. This wire cable is designed for SCSI FAST-XX,
SP and SPI applications.
Industrial
Wire & Electronic Medical Cable
Custom industrial and medical cables are available to work with
your electronic systems. Robotic, harsh environment requirements
are standard considerations in developing custom electronic control
cable. Many of the custom wire cable range from automotive and
robotic applications to medical and optical devices.
|
