HCM Hitachi Cable - Manchester, NH manufactures copper premise cable, electronic ribbon cable, electronic round cable, and fiber optic cable.

	Hitachi Cable Manchester, Inc. 900 Holt Avenue, Manchester, NH USA 03109	Telephone: (603) 669-4347 Toll Free: (800) 772-0116	Email: info@hcm.hitachi.com Fax: (603) 669-9621

Electronic Round Cable Electronic Ribbon Cable Copper Premise Cable Fiber Optic Cable

IEEE 1284 Printer Cable

IEEE 1284 Printer Cable UL / CSA LISTING: (UL CMG c(UL) 75°C

Bulk IEEE Printer Cable

Meets UL 444 FT-4 Burn Requirements.
IEEE Std. 1284-1994 Compliant
28 Gauge Construction
Choose from a wide selection of conductor counts
Dual shielded for low EMI considerations

28 Gauge IEEE 1284 Printer Cable
APPLICATIONS: IEEE Std. 1284-1994 Compliant. (IEEE Standard for Bi-Directional Parallel Peripheral Interface for Personal Computers).

Part No.

Cond.

Insul.

Nom. Primary OD

Tape

Braid

Drain

Jacket

Cond.
Resis.

Cap. Unbalanced

Nom.SE
Imp.
(Ohms)

Nom.Diff.*
Imp.
(Ohms)

Prog. Delay

Atten.
@ 5 MHz

Inches

Ω/Mft.
@20°C

Ω/m
@20°C

pF/ft.
(G-S)

pF/ft.
(G-S-G)

ns/ft.
(Max )

ns/m
Max )

49112-036-H00-000

28 AWG
7/38
Tinned

Flame
Retardant
Solid Polyolefin

.026

.660

100%
AL /PET

85%
Coverage
36 AWG

N/A

Flex PVC
Black**
.297 in. 7.54 mm

.2198

20.2

66.27

100

1.65
(.045)

5.413
(.147)

1.5 dB Max.

IEEE 1284 Printer Cable
Physical Construction Description: Basic construction of the IEEE 1284 Printer Cable uses 28 Gauge (AWG) stranded tinned conductor Solid Polyolefin insulation .026" Nom. OD. Conductors are then twisted into pairs with varying left-hand lays to reduce crosstalk. The wire pairs are cabled with a left-hand lay, shielded with both an AL/PET tape (AL side out) and braid shield. The cable is jacketed with Black Hi-Flex PVC.**
Standard Compliance: IEEE Std. 1284-1994

IEEE 1284 Electronic Printer Cable

All data is for reference only and is subject to change.