HCM Hitachi Cable - Manchester, NH manufactures copper premise cable, electronic ribbon cable, electronic round cable, and fiber optic cable.

	Hitachi Cable Manchester, Inc. 900 Holt Avenue, Manchester, NH USA 03109	Telephone: (603) 669-4347 Toll Free: (800) 772-0116	Email: info@hcm.hitachi.com Fax: (603) 669-9621

Electronic Round Cable Electronic Ribbon Cable Copper Premise Cable Fiber Optic Cable

Firewire Electronic Cable, an IEEE 1394 Wire

IEEE 1394 Cable & 1394 Firewire Cable UL Listing: VW-1, 80ºC, 30V

Bulk Firewire Cable

Meets UL 444 FT-4 Burn Requirements.
Meets IEEE Std. 1394 and 1394 AV for High Speed Serial Bus.
Available in 28, 30 or 32 gauge (AWG) signal pairs.
Multiple shielding layers to meet stringent IEEE 1394 requirements.

Series No.

Signal Pairs

Power Cond.

Impedance
Diff. Mode
(Ohms)

Atten. per 4.5 Meters*

Prog. Delay

Shielding

Cond.

Insul.

Primary
OD

Cond.
Resis.

Cond.

Insul.

Primary
OD

Cond.
Resis.

100 MHz

200 MHz

400 MHz

Tape

Braid

49503

28 AWG
(7/36) TC

Foamed PE

0.039
(1.00)

109
(357)

22 AWG
(7/30)TC

Heat Resistant
Lead-free PVC

0.055
(1.4)

26.8
(88)

110 ± 6

<2.3 dB

<3.2 dB

<5.8 dB

1.5 ns/ft.
5.05 ns/m

100% Alum/PET

85% Coverage
38 AWG

40395

32 AWG
(7/40) TC

Foamed PE

0.027
(0.68)

186
(357)

N/A

110 ± 6

<2.3 dB

<3.2 dB

<5.8 dB

1.5 ns/ft.
5.05 ns/m

100% Alum/PET

95% Coverage
40 AWG

40994

30 AWG
(7/38) TC

Foamed PE
with Skin

0.034
(0.86)

109
(357)

22 AWG
(7/30)TC

Heat Resistant
PVC

0.050
(1.28)

26.8
(88)

110 ± 6

<2.3 dB

<3.2 dB

<5.8 dB

1.5 ns/ft.
5.05 ns/m

100% Alum/PET

90% Coverage
38 AWG

40417

28 AWG
(7/36) TC

Foamed
Polyolefin

0.039
(1.00)

75
(357)

26 AWG
(7/34)TC

Heat Resistant
Lead-free PVC

0.031
(0.78)

43.3
(142)

110 ± 6

<2.3 dB

<3.2 dB

<5.8 dB

1.5 ns/ft.
5.05 ns/m

100% Alum/PET

90% Coverage
40 AWG

40418

30 AWG
(7/36) TC

Foamed
Polyolefin

0.033
(1.00)

109
(357)

26 AWG
(7/34)TC

Heat Resistant
Lead-free PVC

0.031
(0.78)

43.3
(142)

110 ± 6

<2.3 dB

<3.2 dB

<5.8 dB

1.5 ns/ft.
5.05 ns/m

100% Alum/PET

90% Coverage
38 AWG

Detailed Description of IEEE 1394 Firewire Cable Firewire Cable Diagram
Physical Construction Description: These composite IEEE 1394 Firewire Cables consist of six conductors; four signal (2 pair) and two power. The four signal conductors are extruded with foamed polyolefin. The conductors are twisted into pairs. Each pair is wrapped with an AL/PET (100% coverage, 25% min. overlap, AL side out) and braided. The two individually shielded pairs and two power conductors are then cabled together with a left-hand lay. An overall braid shield is applied and jacketed with Hi-Flex PVC. The 40395 consist of four signal (2 pair) wires. The signal conductors are extruded with foamed polyolefin and twisted into pairs. The two pairs are cabled together with a left hand lay, shielded with an AL/PET (100% coverage, 25% min. overlap, AL side out) and braided. The firewire cable is then extruded with a Hi-Flex PVC.

Part No.	No. of Conductors	No. of Pairs	No. of Power Conductors	Jacket OD
Part No.	No. of Conductors	No. of Pairs	No. of Power Conductors	Inches	mm
49503-006*	6	2	Black	0.25	6.4
40395-004*	4	2	Black	0.16	4.0
40394-006	6	2	Sand Beige	0.22	5.5
40417-006*	6	2	Black	0.25	6.4
40418-006*	6	2	Black	0.21	5.3

* Black is standard jacket color for this product but other colors are available upon request.

Firewire Cable - IEEE 1394 Cable

All data is for reference only and is subject to change.