Bulk Industrial Automation Patch / Jumper Cable

4 Pairs of 24 Gauge (7/32) TC Insulated Wire
24 AWG 7/32 Tinned Copper .0235" Nominal OD Conductor
Flame Retardent Polyolefin Insulation
Oil and Water Resistant Jacket for Moderate Flex, Wide Arc C-Track Applications
This is a UL CM Listed Cable
Suitable for Category 6-type "Patch" Transmission Performance

Features
Cable Descriptions
Applications
Specifications

Industrial Cable Features

Jacket Material is High Performance TPE (Thermoplastic Elastomer or Thermoplastic Rubber) with Good Abrasion Resistance and Good Oil, Water and Solvent Resistance. It has Good Cut-through performance and Stand up Well in Long Term Continuous Flex Applications
The Transmission Pairs are Built on the Same Equipment at HCM that Produces Hundreds of Millions of Feet of TIA/EIA Verified Cable

Description

Part #: 30182-8
Description: 4 Twisted Pairs, 24 AWG (7/32) TC, Unshielded with Overall TPE Jacket
UL: UL Type CM, c(UL) FT4

Industrial Ethernet Cable Applications

This Cable is intended for Industrial Ethernet Applications Where the Cable May Be Subjected to One or More of the Following

Oils, Solvents and Fuels
Water and Occasional Steam
Abrasion (Rubbing Against Wheels, Solids Tires, Nylon Guides, Etc ...)
High Vibration Environments Due to Heavy Motors, Tracking and Vehicular Motion
Robotics Applications Where the Unit is Swinging or Sliding
Lift, Drop & Vision Applications Such as Sensor or Guidance Units for Fork Trucks
Short to Medium Distance Powered Applications Using Power over Ethernet (PoV) Ports
Intended for Certain Short to Medium Distance ODVA Ethernet/IP Applications

Cat 6 Industrial Ethernet Unshielded Patch Cable Specifications

Meets Cat 6 Type Electricals

Characteristic Impedance	100 ±15 Ω (1 to 100 MHz) 100 ±20 Ω (101 to 250 MHz)
Conductor Resistance (Max.)	9.38Ω / 100 Meters @ 20°C
Resistance Unbalance (Max.)	5%
Mutual Capacitance (Max.)	5.6 nF / 100 Meters @ 1kHz
Capacitance Unbalance(Max.)	330 pF / 100 Meters
Delay Skew (Max.)	45 ns / 100 Meters

Frequency (MHz)	Insertion Loss Max. (dB / 100 m)	NEXT Loss Min. (dB / 100 m) WP (PS)	ACR Min. (dB / 100 m) WP (PS)	ACRF Min. (dB / 100 m) WP (PS)	Return Loss Min. (dB / 100 m)	Delay Max. (ns / 100 m)
0.772	-	76.0 (74.0)	-	70.0 (67.9)	-	-
1.0	2.4	74.3 (72.3)	71.9 (69.9)	67.8 (64.8)	20.0	570
4.0	4.5	65.3 (63.3)	60.7 (58.7)	55.8 (52.8)	23.0	552
8.0	6.4	60.8 (58.8)	54.4 (52.4)	49.7 (46.7)	24.5	547
10.0	7.1	59.3 (57.3)	52.2 (50.2)	47.8 (44.8)	25.0	545
16.0	9.1	56.2 (54.2)	47.2 (45.2)	43.7 (40.7)	25.0	543
20.0	10.2	54.8 (52.8)	44.6 (42.6)	41.8 (38.8)	25.0	542
25.0	11.4	53.3 (51.3)	41.9 (39.9)	39.8 (36.8)	24.2	541
31.25	12.8	51.9 (49.9)	39.1 (37.1)	37.9 (34.9)	23.3	540
62.5	18.5	47.4 (45.4)	28.9 (26.9)	31.9 (28.9)	20.7	539
100.0	23.8	44.3 (42.3)	20.5 (18.5)	27.8 (24.8)	19.0	538
155.0	30.2	41.4 (39.4)	11.3 (9.3)	24.0 (21.0)	17.4	537
200.0	34.8	39.8 (37.8)	5.0 (3.0)	21.8 (18.8)	16.4	537
250.0	39.4	38.3 (36.3)	-	19.8 (16.8)	15.6	536

The impedance values above reflect actual input impedance data. The data master family does not utilize curve smoothing or fitting when measuring and reporting impedance data. The data master series meets international requirementns for non-fitted input impedance. This cable is compliant to A-568-B.2-1 for category 6 patch cable and is swept tested through 250 MHz.

Temperature Range, Static: -25°C to 80°C
Temperature Range, Flex: -10°C to 50°C