Bulk Industrial Automation Patch / Jumper Cable

4 Pairs of 24 AWG (19/36) Bare Copper for Flexibility
Polyethylene Insulation to .047" Typical
TPE Pressure-Extruded Natural Colored Belt Layer Over 4 Pair Core to Provide Roundness, Crush Strength and Pair to Pair Location Consistency
Belt Diameter of .240" to .260" Suitable for Use with Sentinel Connectors and Other Connector Designs
Polyurethane Jacket Has Excellent Oil & Solvent Resistance
Shielded Design has 38 AWG Tinned Copper Wire with 90% Coverage
Easy to Terminate Design, Best Results with Overmolded Boots; Final Jacket Diameter .320" Nominal Unshielded; 0.340" Nominal Shielded
UL Recognized style 20233, 80 deg C, 300 volts - Flame Test: VW-1
RoHS EU Directive 2002 / 95 EC, WEEE EU Directive 2003 / 96 EC

Features
Cable Descriptions
Applications
Specifications

Industrial Cable Features

Jacket Material is High Performance Polyurethane, with Excellent Abrasion Resistance, and Superior Oil, Water and Solvent Resistance. It has excellent Cut-Through Performance and Stands up Well in Long Term Continuous Flex Applications.
Belt Material is TPE, A Very Robust, Resilient Material that Protects the Core Material From Crush Forces and Excessive Flex Stress
The Transmission Pairs are Built on the Same Equipment at HCM that Produces Hundreds of Millions of Feet of TIA/EIA Verified Cable.

Indoor Simplex Interconnect Fiber Optic Cable Diagram

Rugged Industrial Ethernet Wire Cables Description

Part #: 41017
Description: 4 Twisted Pairs, 24 AWG (19/36) BC, with Pressure-Extruded TPE Belt and Overall Polyurethane Jacket
UL: 20233 80°C, 300 Volts; UL Type CM

Part #: 41016
Description: 4 Twisted Pairs, 24 AWG (19/36) BC, with Pressure-Extruded TPE Belt. 38 AWG TC - 90% Coverage Braided Shield with Overall Polyurethane Jacket

Industrial Ethernet Cable Applications

This Cable is intended for Industrial Ethernet Applications Where the Cable May Be Subjected to One or More of the Following

Oils, Solvents and Fuels
Water and Occasional Steam
Abrasion (Rubbing Against Wheels, Solids Tires, Nylon Guides, Etc ...)
High Vibration Environments Due to Heavy Motors, Tracking and Vehicular Motion
Robotics Applications Where the Unit is Swinging or Sliding
Lift, Drop & Vision Applications Such as Sensor or Guidance Units for Fork Trucks
Short to Medium Distance Powered Applications Using Power over Ethernet (PoV) Ports
Intended for Certain Short to Medium Distance ODVA Ethernet/IP Applications

Rugged Industrial Ethernet Cable Specifications

Meets Cat 5e Type Electricals

Characteristic Impedance	100 ±15 Ω (1 to 100 MHz)
Conductor Resistance (Max.)	25.0 Ω / 1000 ft @ 20°C
Resistance Unbalance (Max.)	5%
Mutual Capacitance	14.0 pf/ft @ 1 MHz Nominal
Velocity of Propagation Max. Delay Skew: 25 ns / 100 meters	66% Nominal

Frequency (MHz)	NEXT Loss Min. (dB / 328ft)	PSNEXT Min. (dB / 328ft)	ACRF Min. (dB / 328ft)	Return Loss Min. dB	Insertion Loss Max. (dB / 328ft)
0.772	67.3	64.3	63.0	---	2.43
1.0	65.3	62.3	60.8	20.0	2.75
4.0	56.3	53.3	47.7	23.0	5.47
8.0	51.3	48.8	42.7	24.5	8.0
10.0	50.3	47.3	40.8	25.0	9.1
16.0	47.3	44.3	36.7	25.0	11.9
20.0	45.3	42.3	34.7	25.0	13.6
25.0	44.3	41.3	32.8	24.3	15.5
31.25	42.3	39.3	30.9	23.6	17.5
62.5	38.3	35.3	24.8	21.5	25.7
100.0	35.3	32.3	20.8	20.1	33.5

Temperature Range, Static: -40°C to 80°C
Temperature Range, Flex: -20°C to 50°C