Hitachi Cable Manchester is an OEM Bulk Cable Manufacturer of Fiber Optic Cable, Premise Cable, Electronic Round Cable, Electronic Ribbon Cable and Custom Wire Cable Home | Search | Catalog Request | Sales Representatives | FAQs
Hitachi Cable Manchester Manufactures Bulk Fiber Optic Cable
Contact Hitachi
Email Hitachi Cable Manchester
1-800-772-0116
603-669-4347

Cable Catalog Available from Hitachi
Rugged Industrial Ethernet Cable

Industrial Ethernet Ruggedized Patch Cable

RoHS Compliant Fiber Optic CablesBulk Industrial Automation Patch / Jumper Cable

  • 4 Pairs of 24 AWG (19/36) Bare Copper for Flexibility
  • Polyethylene Insulation to .045" Typical
  • TPE Pressure-Extruded Natural Colored Belt Layer Over 4 Pair Core to Provide Roundness, Crush Strength and Pair to Pair Location Consistency
  • Belt Diameter of .240" to .260" Suitable for Use with Sentinel Connectors and Other Connector Designs
  • Polyurethane Jacket Has Excellent Oil & Solvent Resistance
  • Shielded Design has 38 AWG Tinned Copper Wire with 90% Coverage
  • Easy to Terminate Design, Best Results with Overmolded Boots; Final Jacket Diameter .320" Nominal Unshielded; 0.340" Nominal Shielded

  • Features
  • Cable Descriptions
  • Applications
  • Specifications

Industrial Cable Features

  • Jacket Material is High Performance Polyurethane, with Excellent Abrasion Resistance, and Superior Oil, Water and Solvent Resistance. It has excellent Cut-Through Performance and Stands up Well in Long Term Continuous Flex Applications.
  • Belt Material is TPE, A Very Robust, Resilient Material that Protects the Core Material From Crush Forces and Excessive Flex Stress
  • The Transmission Pairs are Built on the Same Equipment at HCM that Produces Hundreds of Millions of Feet of TIA/EIA Verified Cable.
Indoor Simplex Interconnect Fiber Optic Cable Diagram

Rugged Industrial Ethernet Wire Cables Description

Part #: 41017
Description: 4 Twisted Pairs, 24 AWG (19/36) BC, with Pressure-Extruded TPE Belt and Overall Polyurethane Jacket
UL: 20233 80°C, 300 Volts; UL Type CM

Part #: 41016
Description: 4 Twisted Pairs, 24 AWG (19/36) BC, with Pressure-Extruded TPE Belt. 38 AWG TC - 90% Coverage Braided Shield with Overall Polyurethane Jacket

Industrial Ethernet Cable Applications

This Cable is intended for Industrial Ethernet Applications Where the Cable May Be Subjected to One or More of the Following

  • Oils, Solvents and Fuels
  • Water and Occasional Steam
  • Abrasion (Rubbing Against Wheels, Solids Tires, Nylon Guides, Etc ...)
  • High Vibration Environments Due to Heavy Motors, Tracking and Vehicular Motion
  • Robotics Applications Where the Unit is Swinging or Sliding
  • LIft, Drop & Vision Applications Such as Sensor or Guidance Units for Fork Trucks
  • Short to Medium Distance Powered Applications Using Power over Ethernet (PoV) Ports
  • Intended for Certain Short to Medium Distance ODVA Ethernet/IP Applications

Rugged Industrial Ethernet Cable Specifications

4 Pair, 24 AWG (19/36) BC; Insulated to .045" Nominal Unshielded; .047" Nominal for Shielded Designs
4 Twisted Pairs, Varied Lays
Color Code: Blue & Blue/White; Orange & Orange/White; Green & Green/White; Brown & Brown/White
Overall Cable Pressure Inner Belt / Jacket of TPE to 0.24" to 0.260" Typical
For Shielded Design, 90% Coverage, 38 AWG Tinned Copper Outer Jacket - Polyurethane, Final Diameter: 0.320" Nominal Unshielded; 0.340" Nominal Shielded; Color: Red
UL 20233, 80C, 300 Volts (Pending)
UL Listed CM (Pending)
Characteristic Impedance 100 Ohms Nominal
Conductor Resistance Typically Less Than 25 Ohms / 1000 ft @ 20°C
Resistance Unbalance Typically Less Than 5%
Mutual Capacitance 14pf/ft Nominal @ 1 MHz
Velocity of Propagation 67% Nominal
Industry Performance Meets Cat 5E TIA/EIA 568 B-2 for NEXT, PSNEXT, ELFEXT
Return Loss 0.772 MHz to 100 MHz

Frequency Insertion Loss
.772 MHz 2.43dB
1 MHz 2.75 MHz
4 MHz 5.47 dB
8 MHz 7.78 dB
10 MHz 8.73 dB
16 MHz 11.14 dB
20 MHz 12..51 dB
25 MHz 14.07 dB
31.25 MHz 15.83 dB
62.5 MHz 22.94 dB
100 MHz 29.67 dB
  • Temperature Range, Static: -40°C to 80°C
  • Temperature Range, Flex: -20°C to 50°C
  • Minimum Bend Radius, Static: 5x Cable Diameter
  • Minimum Bend Radius, Flex: 12.5x Cable Diameter

Continuous Flex: Intended for 10 Million C track Cycles with 3" Radius.
Tic-toc Flex: Intended for 1 Million Cycles.

Note: This Cable is Intended for Low Smoke Zero Halogen Applications

All Data is for Reference Only and is Subject to Change.



Home | About HCM | Cable & Wire Products | Training & Certification | News & Literature
Careers | Find a Cable Specialist  |  Search | Contact Us | Terms | Site Map

2009 © Hitachi Cable Manchester, Inc. 900 Holt Avenue, Manchester, NH 03109 Call: 603-669-4347 Toll Free: 800-772-0116